Вышла новая прошивка на Nokta Makro Simplex V2.76
Вышла новая прошивка на Nokta Makro Simplex V2.76
качаем с официального сайта
переходите по ссылке https://www.noktadetectors.com/metal-detector/simplex-metal-detector/
далее кликайте раздел «Software Update»
качать с компьютера с телефона не получится
Кому нужен вот файл старой прошивки Nokta Makro Simplex V2.68 simplex-2v68-2v34-r798
Высказываемся и обсуждаем новую прошивку!
Software Update (2020.04.17) : System Software V2.76
Download : enc-simplex-system-2v76.zip
Что нового (переведено через онлайн переводчик)
Сделанные Обновления :
1. Для обеспечения дополнительной глубины был добавлен уровень чувствительности 7.
Пожалуйста, имейте в виду, что устройство может работать более шумно на этом уровне в зависимости от условий, и что это совершенно нормально.
2. Был добавлен дополнительный режим-парк 1.
Режим парковки в предыдущих версиях был назван как Парк 2 в этом обновлении, и был добавлен новый режим парковки 1.
Парк 1 относительно глубже, но немного медленнее, чем режим парк 2.
В этом режиме устройство производит низкий тон для черных мишеней с идентификаторами 0-15, средний тон для золота и цветных металлов с идентификаторами 16-69 и высокий тон для цветных металлов с идентификаторами 70-99, таких как серебро, латунь и медь.
3. Были внесены изменения для всех изменений режима металла:
* Он был удален с первого места в опциях и перемещен в конец.
* В этот режим добавлена настройка порога.
В полностью металлическом режиме пороговая настройка для каждого уровня чувствительности оптимизирована для обеспечения наилучшей производительности на различных участках местности.
Вы можете приспособиться
Английский оригинал
Updates Made :
1. Sensitivity Level 7 has been added to provide extra depth.
Please keep in mind that the device may run noisier at this level depending on conditions and that this is totally normal.
2. An extra mode has been added — Park 1.
The Park mode on the previous versions has been named as Park 2 on this update and a new Park 1 mode has been added.
Park 1 is relatively deeper but a bit slower than Park 2 mode.
In this mode, the device produces a low tone for ferrous targets with 0-15 IDs, a medium tone for gold and non-ferrous metals with IDs 16-69 and a high tone for non-ferrous metals with IDs 70-99 such as silver, brass and copper.
3. Changes have been made for the All Metal Mode changes:
* It has been removed from the first spot in the options and moved to the end.
* Threshold setting has been added to this mode.
In the All Metal mode, the threshold setting for each sensitivity level is optimized to provide the best performance on different terrains.
You can adjust the threshold setting between -50 +50 based on ground conditions.
4. Mineralization bar has been added to the screen.
5. Timeout lengths have been increased.
6. BACK function (up arrow) has been added to exit from settings to go back to the main screen without waiting for the timeout.
7. ID depth has been increased.
8. 4 levels have been added to Automatic Brightness shown as A1-A2-A3-A4 on screen.
9.Audio for the pinpoint mode and wired headphones has been optimized.
10. Manual Ground Balance function has been expanded:
If the device receives a lot of noise and/or emits false signals and you cannot eliminate it by reducing the sensitivity, first set your sensitivity back to its original level. Then increase the ground balance value between 90.1 — 91.0 one by one until the noise is eliminated. As the ground balance value is increased, the device’s sensitivity to high conductive (silver, copper etc.) coins will decrease.
Больше информации смотрите по ссылкам: